TP-LINK-EXTENDER-SETUP-banner (1)

If you want to increase or boost the Wi-Fi range at your home or office then the Tp-link extenders are the best. There are areas in your home where the Tp-link Extender range of your Wi-Fi can’t be reached. These areas are called dead spots. In these areas, as well as you feel disconnected from the internet, from other members. So, purchase an extender and perform tp-link extender setup at your home by accessing the website tplinkextender.net or tplinkrepeater.net and enjoy internet access at every corner of your home.

HOW DOES AN EXTENDER WORKS?

The Tp-Link Range Extender takes the signal from the router and retransmits it to the areas where the range of the router does not exist. The main advantage of using an Tp-Link Range extender is you do not get confused with the cables. But as well as you have to keep in mind that the extender position matters a lot. Change the position of your Tp-link extender until you get a perfect location for it. Hence it is recommended to use the same Company’s extender as that of your router’s company. But this is not a compulsion; as well as you can purchase both of different Companies. After having an extender, as well as you have to set it up by using the website tplinkextender.net or tplinkrepeater.net or we can say by using the web interface of the Tp-link extender.

tplinkwifi

HOW TO LOG INTO THE WEB BASED INTERFACE OF THE TP-LINK RANGE EXTENDER?

The web based interface of the Tp-Link Range extender does not wish to have internet access or you do not need the internet to access the web based interface of the extender. It just needs to have a connection between the Tp-link extender and your device.

  1. Take an Ethernet cable (you will get one with the extender). Connect its one end to your device that is computer and another end to the LAN port of the Tp-link extender.
  2. Go to network and internet connection under the control panel and assign your computer a static IP address. As well as If you have any query, feel free to contact us.
  1. Launch an Internet browser such as Mozilla Firefox and Microsoft Internet Explorer. In the URL field of the browser type the default IP address of your Tp-Link Range extender. As well as the default IP addresses are 192.168.1.1 or 192.168.1.254 or 192.168.0.254. Try one by one as your Tp-Link Range extender’s interface starts with one of these. Hit Enter key.
  2. A login window displays. Hence you will see a username and a password field. Enter the same in the respective fields. Hence you have to enter the default username and password. Both are admin in this case.
  3. Click OK. As well as after performing these steps, you get landed to the management page of your extender.

 

HOW TO CONFIGURE OR SETUP THE TP-LINK EXTENDER?

Here, as well as we are discussing the configuration of the extenders that do not have a DHCP (Dynamic Host Configuration Protocol) server. As well as follow the steps given below to do the same:-

  1. Log into the extender by following the steps given above.
  2. Go to Network. As well as make sure the IP address of your computer and the router must be in the same range. Click on save button.
  3. Go to Quick Setup or click on it by using the mouse. Click next then wireless. As well as In the Operation mode field, select Tp-Link Range extender from the drop down list. Click on the search button.
  4. Find and select the network name (SSID) of your router from the list of available networks. As well as Click connect that you will see on the right side of the screen.
  5. Click on save button.
  1. Go to Wireless then wireless security. Select the security information same as your Tp-Link Range Extender router. For an instance, select WPA2-PSK/WPA-PSK and encryption AES. Enter tp-link in the PSK password field. Click save. As well as it is necessary for both router and extender to have the same security settings. They will work properly.
  2. If you want to check then go to System Tools then click on Diagnostic. As well as enter the IP address of the root router in the IP address or Domain Name field.
  3. Click start.
  4. Change your computer settings so that it can obtain the IP address automatically.

As If you get trouble in checking the security information, contact us via our live chat window where experts are available all time to help you. Now, we will discuss an easy method to setup the Tp-Link range extender that is through WPS (Wi-Fi Protected Setup) button.

CONFIGURING THE TP-LINK EXTENDER VIA WPS BUTTON
tplinkwifi

In this case, there is an existing router. Follow the steps given below:-

  1. Place your extender near the existing router. Provide power to your Tp-Link Range extender so plug it in the power outlet.
  2. Press the WPS button on your existing router first then immediately press the WPS button on the Tp-link extender. Locate the WPS button on both the router and the Tp-Link Range extender before starting the process. As well it is recommended to push the WPS button on the extender within two minutes after you have pushed the WPS button on your router or Access Point.
  3. To check whether your router has started processing after you have pressed the WPS button, see the WPS LED light on your router, it will start blinking.
  4. It will take two minutes then will get connected to the existing router. Your Tp-Link Range extender’s wireless signal LED light up after successful establishment of the connection between the two.
THE PROBLEMS YOU'll GET WHILE INSTALLING THE EXTENDER AND THEIR SOLUTIONS

If you are an unable to access the management page of the Tp-Link extender by using the tplinkrepeater.net and tplinkextender.net:-

  1. The reason for this may be your device is not directly connected to the range extender. So, connect it directly to your range extender. Another solution to this problem is accessing using the IP address of your Tp-Link range extender. Hence if you do not know the IP address of your extender then check the DHCP list of the existing router.
  2. Flush the local DNS cache to resolve this issue. To do this, disconnect your router and extender. As well as turn them on again and wait for a while. Hence now go to Start menu then all programs then accessories. Open the command prompt. As well as you can directly open it by typing cmd in the run field of your computer. Type ipconfig/flushdns in the command prompt window.
  3. It may be possible that you have entered the domain name that is tplinkextender.net and you may use tplinkrepeater.net in the search bar field located on the upper right corner of the Tp-Link Range Extender browser window instead of typing it in the URL bar. As well as Please ensure that you have entered the domain name in the correct field.

If you’ve got tried all the solutions given above and still getting an equivalent issue then contact our expert team to repair this issue. We are here to help you 24/7. Hence our experts are having an experience of several years in the same field. As well as you may get some other issues or problems while setting up the range extender. Not to worry, we will solve every issue and 2provide the solution regarding any router or any Tp-Link Range extender.

FREQUENTLY ASKED QUESTIONS

Tp-Link extender acts a wifi booster that takes wifi signals from the prevailing router and rebroadcasts it to the broader area. It covers the dead spots that are present in your place. You can enjoy an extended network even to the surface area of your home.

Follow the below-given steps to log into tp-link extender-

  1. Open a browser of your choice on a device connected to tp-link network.
  2. Type tplinkrepeater.net or 192.168.1.1.
  3. Fill in the login details when asked by the window, press on the ‘login’ option.
  4. This will redirect you to the tp-link setup wizard.

 

Here are some steps that need to be performed for changing tp-link extender login password:-

  1. On the newly opened browser, type tplinkextender.net.
  2. Fill in the tp-link extender login details such as provide username and password, press the enter key.
  3. Once you’re signed in, go to the ‘Admin’ tab.
  4. Find the option of changing login password. Enter a new login password.
  5. Click on the ‘Save’ button.

 

In case, you can’t recall the login password of tp-link extender, you won’t be able to get into configuration utility. To get out of this example, you’d got to reset your device to its factory default settings.

You will be required to enter the Wi-Fi password, if you want to connect to tp-link network. Here are steps to change it:-

  1. Log into tplinkrepeater.net login page by providing the username and password.
  2. Go to the ‘Wireless’ tab and then go to the ‘Wireless Settings’ option.
  3. Enter a new network passkey and SSID on the required fields.
  4. Do not forget to press the ‘save’ option to apply the settings.

You can find the hardware version of your device on the product label as well as user-manual. The SSID and password are printed on the Tp-Link Range extender’s label. Hence you will also find the login credentials on the device itself.

  1. Web domain- tplinkrepeater.net
  2. Ip address- 192.168.0.254
  3. Username- admin
  4. Password- admin

Hence you need to download the tether app on your mobile device. As well as it is available for free on the App Store or Play Store. Register your product to the app. Manage, configure, and set up your tp-link extender easily.

You must place your tp-link repeater in a midway between your wireless router and the area with slow wifi signals. Keep your Tp-Link Range extender away from thick walls, bricks, or large metal objects.

It is important to upgrade your tp-link repeater in order to improve its performance and enhance its security features.

Yes, you’ll found out your tp link extender employing a WPS method as long as your existing router should also support WPS button. As well as WPS method is a relatively easier method and it takes less time.

You will be required to enter the Wi-Fi password, if you want to connect to tp-link network. Here are steps to change it:-

  1. Log into tplinkrepeater.net login page by providing the username and password.
  2. Go to the ‘Wireless’ tab and then go to the ‘Wireless Settings’ option.
  3. Enter a new network passkey and SSID on the required fields.
  4. Do not forget to press the ‘save’ option to apply the settings.

You can find the hardware version of your device on the product label as well as user-manual. The SSID and password are printed on the Tp-Link Range extender’s label. Hence you will also find the login credentials on the device itself.

  1. Web domain- tplinkrepeater.net
  2. Ip address- 192.168.0.254
  3. Username- admin
  4. Password- admin

Hence you need to download the tether app on your mobile device. As well as it is available for free on the App Store or Play Store. Register your product to the app. Manage, configure, and set up your tp-link extender easily.

You must place your tp-link repeater in a midway between your wireless router and the area with slow wifi signals. Keep your Tp-Link Range extender away from thick walls, bricks, or large metal objects.

It is important to upgrade your tp-link repeater in order to improve its performance and enhance its security features.

Yes, you’ll found out your tp link extender employing a WPS method as long as your existing router should also support WPS button. WPS method is a relatively easier method and it takes less time.